Position Logging

Development and series production of a freely configurable hardware system based on Qseven modules; for verification of air traffic controllers workplaces, in which authorisations are automatically controlled and data is recorded and stored. The integrated RFID reader is switched on and off by IR proximity sensor.

• Processor: Ultra Low Power NXP i.MX6 Solo ARM Cortex A9
• Processor rate: 1.0 GHz
• RAM: 1 GB DDR3 onboard
• Flash: 4 GB eMMC onboard
• Graphics controller: integrated; 2D graphics (GPU2D) and 3D graphics (GPU3D) as well as OpenGL (OpenCL & OpenVG 1.1)
• Display: 3.5 inch TFT display, transmissive, anti-glare
• Resolution: 320 × 240 pixels
• Operating system: Embedded Linux
• Cooling: passive, without moveable parts
• Housing: EMC compliant aluminium housing for installation in 19-inch rack system
• Dimensions (WxHxD): 103 mm × 109 mm × 100 mm
• Power supply: 230 V-AC, via IEC power connector, rear-mounted
   
• Features and interfaces:
  • 1 × RFID card reader with proximity sensor according to MIFARE standard ISO 14443A
  • 1 × 10/1000/1000 Mbit ethernet (RJ45)
  • 1 × 10/1000/1000 Mbit ethernet (LWL, LC plug connector) 
  • 1 × reset button, exernally accessible
  • 4 × LED for status

• Optional interfaces:
  • 1 × mini PCI express socket
  • 1 × mSATA
  • 1 × 8 bit SD card socket
  • 3 × USB 2.0
  • 1 × UART
  • 1 × HDMI